This Silkland DP80 DisplayPort Cable review looks at a compact 1.6-foot cable built for high-bandwidth gaming setups. Its 80Gbps rating and broad refresh-rate support target demanding displays, provided both ends of the connection support the modes you want.
Silkland DP80 Cable Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A short, high-bandwidth DisplayPort cable for gamers pairing DP 2.1 capable graphics cards with nearby monitors.
- VESA-certified DisplayPort 2.1 cable with an 80Gbps bandwidth rating and male-to-male connectors.
- Listed uncompressed modes include 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; DSC-enabled modes reach up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz.
- Supports VRR, FEC, ALLM, DSC 1.2a, MST, dynamic HDR10+, 3D, and HDCP 2.3.
- Backward compatible with DisplayPort 2.0 and 1.4; listed for uncompressed 7.1, 5.1, and 2.0 audio pass-through.
Pros
- High 80Gbps bandwidth rating with a broad range of listed resolution and refresh-rate combinations.
- VESA certification and support for gaming-oriented features such as VRR, ALLM, and DSC.
Consider before buying
- At 1.6 feet, it may be too short if the PC and display are not close together.
- The highest listed modes depend on compatible source and display hardware, and some require DSC.
Read the full review summary
Silkland’s DP80 is a short male-to-male DisplayPort 2.1 cable with VESA certification and a stated bandwidth of up to 80Gbps.
Its listed modes include uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz, with higher listed resolutions or refresh rates available when DSC is enabled.
That range makes it a candidate for a current high-refresh gaming setup or a future monitor upgrade.
The 1.6-foot length suits a desktop where the graphics card and monitor sit close together, while the flexible, braided nylon exterior and latch-free connectors are useful design choices for frequent cable handling.
The main purchase check is compatibility: the graphics card and monitor need suitable DisplayPort support for the output mode you want, and a short cable may not suit every desk layout.
The buying factors
Silkland DP80 Cable Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Bandwidth headroom
The 80Gbps DP80 rating provides substantial bandwidth for compatible high-resolution, high-refresh displays.
Listed display modes
The product details cover demanding uncompressed modes as well as higher modes with DSC enabled.
Gaming features
VRR, ALLM, FEC, DSC 1.2a, and MST support address gaming and multi-monitor use cases.
Build and handling
Triple shielding, tinned copper conductors, braided nylon, and latch-free plugs are practical design features.
Desk placement flexibility
The 1.6-foot length keeps a nearby connection tidy but limits placement options.
Backward compatibility
It is listed as backward compatible with DisplayPort 2.0 and 1.4, though achievable modes depend on connected hardware.
Key Features and Specifications of Silkland DP80 Cable
- VESA-certified DisplayPort 2.1 cable with an 80Gbps bandwidth rating and male-to-male connectors.
- Listed uncompressed modes include 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; DSC-enabled modes reach up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz.
- Supports VRR, FEC, ALLM, DSC 1.2a, MST, dynamic HDR10+, 3D, and HDCP 2.3.
- Backward compatible with DisplayPort 2.0 and 1.4; listed for uncompressed 7.1, 5.1, and 2.0 audio pass-through.
- Uses 28AWG tinned copper conductors, triple shielding, 24K gold-plated connectors, and a braided nylon exterior.
- The 1.6-foot cable has latch-free connectors and is intended for indoor connections between DisplayPort-equipped PCs and monitors.
Pros and Cons of Silkland DP80 Cable
Pros
- High 80Gbps bandwidth rating with a broad range of listed resolution and refresh-rate combinations.
- VESA certification and support for gaming-oriented features such as VRR, ALLM, and DSC.
- Short length can help keep a close PC-to-monitor connection neat.
- Braided exterior, triple shielding, and latch-free plugs address durability and convenient removal.
Consider before buying
- At 1.6 feet, it may be too short if the PC and display are not close together.
- The highest listed modes depend on compatible source and display hardware, and some require DSC.
- Its short reach and high bandwidth focus may be unnecessary for a basic display connection.
Who Should Buy Silkland DP80 Cable?
Good fit
Consider the DP80 if your gaming PC and monitor are close together and you want a short cable with substantial bandwidth headroom.
Its listed support for high refresh rates, VRR, and DSC makes it a reasonable fit for an enthusiast setup built around compatible DisplayPort equipment.
Before ordering, check the available ports and the output modes supported by both your graphics card and monitor.
Confirm that 1.6 feet reaches comfortably along your intended route, including enough slack to connect and disconnect without pulling on the plugs.
Who should skip it
Look for a longer cable if your computer is under a desk, positioned farther from the monitor, or routed around furniture. The short length is the clearest constraint in this design.
A lower-bandwidth cable may be a better fit for a routine setup that does not need high refresh rates or advanced display modes. The DP80’s capabilities only matter when the connected devices support them.
How the Silkland DP80 Cable fits a high-refresh setup
Bandwidth and real-world mode selection
The 80Gbps rating and listed 4K 240Hz, 8K 60Hz, and 2K 540Hz uncompressed modes are aimed at displays that place heavy demands on a connection.
Higher figures in the product details are conditional on DSC, so buyers should check the exact mode combination their graphics card and monitor support rather than treating every maximum as interchangeable.
Gaming and multi-monitor features
VRR, ALLM, FEC, and DSC 1.2a are relevant to gaming configurations where the display and graphics hardware also support those features.
MST is listed for multi-monitor use; the product notes recommend keeping the same cable type across multiple screens, so plan a consistent DisplayPort setup if you intend to expand.
A compact physical connection
The 1.6-foot length is best suited to a PC placed near the monitor.
Braided nylon, tinned copper conductors, and triple shielding are intended to support a robust signal path and regular handling, while the latch-free connector design may make removal simpler when access is tight.
Compatibility and audio
The cable is listed as backward compatible with DisplayPort 2.0 and 1.4, and as supporting uncompressed 7.1, 5.1, and 2.0 audio pass-through.
As with any display cable, backward compatibility does not mean every connection can use the DP80’s top listed modes; the source, display, and selected settings determine the available output.
Alternatives to Silkland DP80 Cable
One useful alternative is included; compare cable length and supported display modes against your setup before choosing.
Computer DisplayPort Cables alternative

7,000+ ratings
Read Amazon ReviewsSilkland 54Gbps 16K DisplayPort Cable, 10 ft
Choose the DP80 when a nearby connection and its higher bandwidth rating suit your setup.
The 10-foot alternative offers much greater reach and may be a better fit when the computer is farther from the monitor, with a lower stated bandwidth rating.
- This 10-foot Silkland cable is rated at 54Gbps and lists 4K at up to 240Hz, 8K at 120Hz, and 16K at 60Hz with DSC.
- The DP80 is a 1.6-foot cable rated at 80Gbps, with listed uncompressed support up to 4K at 240Hz.
Is Silkland DP80 Cable Worth It?
The Silkland DP80 DisplayPort Cable is worth considering for a high-refresh gaming setup that needs a short, VESA-certified DP 2.1 connection.
Its high bandwidth rating, gaming feature support, and reinforced construction make it a capable-looking fit for compatible equipment.
Measure the route and confirm the graphics card and monitor support your target mode, especially for DSC-dependent maximums.
If the 1.6-foot length works and the connected devices can use its features, it is a focused option; otherwise, prioritize a cable length and bandwidth that better match your hardware.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A short, high-bandwidth DisplayPort cable for gamers pairing DP 2.1 capable graphics cards with nearby monitors.
- VESA-certified DisplayPort 2.1 cable with an 80Gbps bandwidth rating and male-to-male connectors.
- Listed uncompressed modes include 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; DSC-enabled modes reach up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz.
- Supports VRR, FEC, ALLM, DSC 1.2a, MST, dynamic HDR10+, 3D, and HDCP 2.3.
- Backward compatible with DisplayPort 2.0 and 1.4; listed for uncompressed 7.1, 5.1, and 2.0 audio pass-through.